COMMAND TROUBLESHOOTING E1


[root@ipbx ~]# wanpipemon -i w1g1 -c Ta

***** w1g1: E1 Rx Alarms (Framer) *****

ALOS: OFF | LOS: OFF
RED: OFF | AIS: OFF
LOF: OFF | RAI: OFF

***** w1g1: E1 Rx Alarms (LIU) *****

Short Circuit: OFF
Open Circuit: OFF
Loss of Signal: OFF

***** w1g1: E1 Tx Alarms *****

AIS: OFF | YEL: OFF
***** w1g1: E1 Performance Monitoring Counters *****

Line Code Violation : 234
Far End Block Errors : 0
CRC4 Errors : 0
FAS Errors : 118
Rx Level : > -2.5db
======
[root@ipbx ~]# asterisk -rx “pri show spans”
PRI span 1/0: Up, Active

=======

[root@ipbx ~]# asterisk -rx “pri show span 1”
Primary D-channel: 16
Status: Up, Active
Switchtype: EuroISDN
Type: CPE
Remote type: Network
Overlap Dial: 0
Logical Channel Mapping: 0
Timer and counter settings:
N200: 3
N202: 3
K: 7
T200: 1000
T201: 1000
T202: 10000
T203: 10000
T303: 4000
T305: 30000
T308: 4000
T309: 6000
T312: 6000
T313: 4000
T-HOLD: 4000
T-RETRIEVE: 4000
T-RESPONSE: 4000
T-STATUS: 4000
T-ACTIVATE: 10000
T-DEACTIVATE: 4000
T-INTERROGATE: 4000
T-RETENTION: 30000
T-CCBS1: 4000
T-CCBS2: 2700000
T-CCBS3: 20000
T-CCBS4: 5000
T-CCBS5: 3600000
T-CCBS6: 3600000
T-CCNR2: 10800000
T-CCNR5: 11700000
T-CCNR6: 11700000
Q931 RX: 416260
Q931 TX: 489739
Q921 RX: 1340074
Q921 TX: 1500240
Q921 Outstanding: 0 (TEI=0)
Total active-calls:0 global:1
CC records:
Overlap Recv: No
==========
ipbx*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo default default In Service
1 from-pstn default In Service
2 from-pstn default In Service
3 from-pstn default In Service
4 from-pstn default In Service
5 from-pstn default In Service
6 from-pstn default In Service
7 from-pstn default In Service
8 from-pstn default In Service
9 from-pstn default In Service
10 from-pstn default In Service
11 from-pstn default In Service
12 from-pstn default In Service
13 from-pstn default In Service
14 from-pstn default In Service
15 from-pstn default In Service
17 from-pstn default In Service
18 from-pstn default In Service
19 from-pstn default In Service
20 from-pstn default In Service
21 from-pstn default In Service
22 from-pstn default In Service
23 from-pstn default In Service
24 from-pstn default In Service
25 from-pstn default In Service
26 from-pstn default In Service
27 from-pstn default In Service
28 from-pstn default In Service
29 from-pstn default In Service
30 from-pstn default In Service
31 from-pstn default In Service
=============

ipbx*CLI> dahdi show status
Description Alarms IRQ bpviol CRC Fra Codi Options LBO
wanpipe1 card 0 OK 0 0 0 CCS HDB3 0 db (CSU)/0-133 feet (DSX-1)
==========

ipbx*CLI> dahdi show channel 1
Channel: 1
File Descriptor: 11
Span: 1
Extension:
Dialing: no
Context: from-pstn
Caller ID:
Calling TON: 33
Caller ID name:
Mailbox: none
Destroy: 0
InAlarm: 0
Signalling Type: ISDN PRI
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Busy Detection: no
TDD: no
Relax DTMF: yes
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Gains (RX/TX): 0.00/0.00
Dynamic Range Compression (RX/TX): 0.00/0.00
DND: no
Echo Cancellation:
128 taps
currently OFF
Wait for dialtone: 0ms
PRI Flags:
PRI Logical Span: Implicit
Hookstate (FXS only): Onhook
=============

ipbx*CLI> pri set debug on span 1

=============

ipbx*CLI> pri show channels
PRI B Chan Call PRI Channel
Span Chan Chan Idle Level Call Name
1 1 Yes Yes Idle No
1 2 Yes Yes Idle No
1 3 Yes Yes Idle No
1 4 Yes Yes Idle No
1 5 Yes Yes Idle No
1 6 Yes Yes Idle No
1 7 Yes Yes Idle No
1 8 Yes Yes Idle No
1 9 Yes Yes Idle No
1 10 Yes Yes Idle No
1 11 Yes Yes Idle No
1 12 Yes Yes Idle No
1 13 Yes Yes Idle No
1 14 Yes Yes Idle No
1 15 Yes Yes Idle No
1 17 Yes Yes Idle No
1 18 Yes Yes Idle No
1 19 Yes Yes Idle No
1 20 Yes Yes Idle No
1 21 Yes Yes Idle No
1 22 Yes Yes Idle No
1 23 Yes Yes Idle No
1 24 Yes Yes Idle No
1 25 Yes Yes Idle No
1 26 Yes Yes Idle No
1 27 Yes Yes Idle No
1 28 Yes Yes Idle No
1 29 Yes Yes Idle No
1 30 Yes Yes Idle No
1 31 Yes Yes Idle No
ipbx*CLI>
===========

wanpipemon -i w1g1 -pcap -pcap_file isdn.pcap -prot ISDN -full -systime -c trd

Advertisements

One thought on “COMMAND TROUBLESHOOTING E1

  1. shisdew October 24, 2012 at 9:07 am Reply

    Reblogged this on shisdew and commented:
    helpful..

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

shisdew

Listens until think alike

moses.spaceku@yahoo.com / voip ipbx

Hosted PBX, IP-PBX SOHO/ CALL CENTER, VOICE GATEWAY, VOICE CARD, COST EFECTIVE SOLUTIONS (LCR), GSM/CDMA GATEWAY

%d bloggers like this: